- Ncplot tutorial for free#
- Ncplot tutorial how to#
- Ncplot tutorial upgrade#
- Ncplot tutorial software#
- Ncplot tutorial free#
There is one upgrade that would be great and I suspect it would be relatively easy. I've not cut anything with it, just getting my feet wet. So, if you haven't sent Bruce an email, get on it! He's a great guy. Bruce, on his own initiative, wrote the Cutter Editor program that does that, and much more.)Įvery once in a while, just to remind myself of what if would have been like without Bruce's program, I create a doors.csv file from scratch, just using the spreadsheet and then run doors.exe from the command line.
Before responding, I would sometimes go to AutoCAD LT and draw the cutters so that I could visually see whether the cove cutter would nick the V-cut.
(Some of you have written and asked if you could use a certain size cove cutter with a certain sized groove cutter. Had he NOT volunteered countless hours to write a GUI frontend for the program, an excellent tutorial, the extremely valuable Cutter Editor program, and, just this week, an excellent how-to tutorial, no one would have ever been able to cut a door - except me. It was his efforts that made the program usable. I hope that everyone who has downloaded the program has also personally thanked Bruce Clark.
Ncplot tutorial free#
In the world of free software, that is considered a payday. Many of you have written me personally, with tales and descriptions of what you have built. This release is BETA but we feel it should be stable enough for production work, if that is what you are using it for. This has a few enhancements and some cleaned up code.
Lastly, Mike has updated his doors.EXE program to 7.14b. For a better explanation, please open one of the provided DXF tool profiles in your CAD/CAM/drawing program. Otherwise, the tool will be draw off location in the preview. To make a custom tool profile, you need to draw it at true to life size AND the cutting point or tip must be at 0,0. This also allows for different tool settings for different jobs (make a copy of your new tool set and then copy-or save-the tool set as CUTTERS.CSV so that Mike's DOORS.EXE can find it).Īlso, if you want to preview what a special tool's cutting profile will look like, you can create it (if it does not currently exist) with any CAD or drawing program that can export DXF files. When finished, you can save your tool set (tool selections and all) for a later recall. You can experiment with different size cutters, tool types and depths. This CUTTERS.CSV editor allows you to 'preview' what the groove between the panel and the stiles and rails will look like without being at your machine. This has been made a lot easier with the new plug-in called 'Cutters Editor'. Also, tool depths, tabs, and sizes were a big 'trial and error' in getting the settings correct. Mike's original tools, while commonly available, where not that common to a lot of users.
Ncplot tutorial for free#
The choice of cutters for Free Doors was a major sticking point with a lot of people. With the way the program is currently implemented, you need to have a program selected. If not, just select something like Notepad.exe. As for the DXF, any CAD/CAM program that can accept a command line file name, can be used to preview the DXF output. It is FREE and it integrates very nicely with the FreeDoor's preview.
Ncplot tutorial software#
For the G-Code, if you are a MACH controller user, use your Mach software ( or, as we recommend, NCPlot 1.1. This portion of the program has stayed the same-it opens up the ShopBot control software in the preview mode. The ShopBot previewer we recommend is the ShopBot control software. Since you have a choice if 3 types of output, you are also offered a choice of 'Previewers'. The DXF option allows you to open up the cabinet door paths in a CAD/CAM program for further embellishement such as V-Carving (we like VCarvePro by Vetric or 3D carvings. G-Code opens up Free Doors to be usable by a lot more CNC router machines. First off, Free Doors now supports G-Code and DXF file exporting. There are some major changes to Free Doors. It has been a while, but the wait should be worth it. So, please read that FIRST! Also, I am including the updated portion of the FreeDoors_ReadMe.TXT file, which included some more indepth information about the Cutters Editor.įirst off, I would like to thank Michael Richards for making his cabinet door software available to everyone.
Ncplot tutorial how to#
I have also updated the 'Getting Started Tutorial' to include how to use the Cutters Editor. Free Doors now exports ShopBot code, G-Code, and DXF format. This includes the latest Doors.EXE from Mike Richards, the new Cutters Editor (taking into account the feedback that I got from the early alpha testers) and the UNIVERSAL version of Free Doors. I have finally updated the Free Doors website to include the latest Free Doors 4.0U Beta installer.
0 kommentar(er)
